Ambient Monitor Gas Calibrators with Ozone Generators

04 June 2019

EnvironicsĀ® Ambient Monitor Calibrator with Ozone Generators assist with the dynamic calibration of ambient air analyzers. The instruments automatically perform zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other related GHG gases. All ozone generators are factory calibrated using a NIST traceable ozone standard. 

The Series 6100 Computerized Multi-Gas Calibration System

The Series 6100 includes a single chassis supporting up to three (3) thermal mass flow controllers, an ozone generation module, a mixing zone, a reaction chamber for gas phase titration and control electronics. The instrument may also be remotely operated using contact closures or the RS-232 serial data interface.

The Series 6103 Ozone Transfer Standard /Photometric Ozone Calibrator

The Series 6103 includes a single chassis supporting up to three (3) thermal mass flow controllers, an ozone generation module, photometer, glass output manifold, mixing chamber, a reaction chamber for gas phase titration and control electronics. Like the Series 6100, the Series 6103 may also be remotely operated using contact closures or the RS-232 serial data interface.

The Series 9100 Computerized Ambient Monitoring Calibration System

The Series 9100 Computerized Ambient Monitoring Calibration System contains a single chassis supporting up to three (3) thermal mass flow controllers, an ozone generation module, a mixing zone, a reaction chamber for gas phase titration and control electronics. It is operated through a large, worksheet format screen or may be remotely operated using optional contact closures or the RS-232 serial data interface.

The complete Series meets all U.S. Environmental Protection Agency requirements.

Image Courtesy of EnvironicsĀ®.